SA6 is a simple portable spectrum analyzer and signal source designed to display the spectrum of signals in the 35 to 6200 MHz frequency range. Analyzer finds the amplitude and frequency of the spectral components of the process being analyzed. The spectrum analyzer can process signals from all widely used technologies:Wi-Fi, 2G, 3G, 4G, LTE, CDMA, DCS, GSM, GPRS, GLON, ASS and more. Performance Parameters: 3.2-inch color resistive touch screen Wide frequency range: 35 to 6000MHz Fast scanning of the frequency range: 500 points per point High measurement accuracy: 2dB within 70-75dB dynamic range Particularly easy to use in the field: weight as low as 380 grams Dimensions 150x75x23 mm Individually powered for up to 5-8 hours of uninterrupted operation . Wired data transfer to PC Dynamic range in the 35-3000MHz band: 75dB Dynamic range in the 3000-4500MHz band: 70dB Maximum span:6165MHz Bandwidth:200kHz, fixed Scanning speed for viewing bands above 100MHz:700MHz/sec Scanning 100MHz:<0.25sec Noise floor up to 3000 MHz:<-90dBm Noise floor 3000-4500 MHz:<-85 dBm Noise floor 4500-6200 MHz:<-80 dBm Wave impedance: 50 ohms VSWR over the operating frequency range:<1,5 Internal attenuator: 0-30 dB Attenuation error up to 10 dB: 2 dB Attenuation error from 10 to 20dB: 5dB 20 to 30dB attenuation error: 8dB Tracking generator output power:-15... -25dBm Accuracy in dynamic range: 2,0dB Maximum input power of the attenuator at 0dB: 10dBm Maximum input power with attenuation greater than 20dB: +20dBm Maximum input measurement signal: +10 dBm Maximum input DC voltage: 25 volts Maximum current consumption when running from battery: 450 mA Maximum current consumption when running from USB: 500 mA (when charging) Battery: 2500 mA Endurance:3 hours Battery charging time:5 hours