The top tier E600 all-digital display multi-function acupuncture instrument is one of the most featured and advanced electrotherapy device on the market! Highlighted with assorted accessories, and delivering six different waveforms.With 6 channels you can stimulate up to 12 acupuncture points at the same time. The intensity is controlled by push buttons rather than dials allowing for comfortable and predictable adjustment increments, no more sudden jolts for patients. Channels have a maximum out-put of 40 mA.The E600 comes with 6 pre-set wave forms including Han mode which works by stimulating low and high frequency simultaneously, maximizing analgesic effect. Additional wave forms include continuous, intermittent, ripple, dense & disperse, and modulate.The unit also comes with a special pen probe used for measuring electrical resistance on skin and locating acupuncture points. The probe can also be used to deliver direct stimulation up to 64 mA to an acupuncture point.For a look at the manual and a full list of specifications please contact our friendly staff. Channels 6 Intensity 0-40 mA (milliamp) Frequency 0.5 Hz, 0.7 Hz, 1500 Hz Waves (6) Continuous, Intermittent, Ripple, Dense & disperse, Modulate, HAN mode Attachment Point detector and stimulator (0-64 mA) Timer Yes Specifications: Output channels: 6 outputs Volts & current: Low 0-5 volt, 0-10 mA (milliamp) (500 ? load) High 0-20 volt, 0-40 mA (milliamp) (500 ? load) Stim Mode: 0-32 volt, 0-64 mA (milliamp) (at 500 ? load) Pulse shape: Symmetric waveform Asymmetric waveform for HAN mode Pulse Width: 50 to 400 ?S, adjustable Pulse Rate: 0.5, 0.7, 1 - 500 Hz adjustable Output modes: Continuous, Intermittent, Ripple, Dense & disperse, Modulate, HAN mode Timer: 1 to 60 minutes and Continuous LOC: Skin impedance monitoring LOC Conductivity : 0 - 200 LOC Sensitivity setting 3 levels: L5, L10, L20 with Sound On/Off function The Error LED will illuminate when output intensities are not set to 0 during the change of a waveform, when HI/LOW output is toggled Or LOC/STIM mode is toggled. When the ERROR LED illuminates, All intensities will be reset to 0. Pressing any key will turn the ERROR LED and buzzer off and return the device to normal operation. Low Battery LED: When the battery voltage drops to under 7 volts, this LED will illuminate indicating that new batteries need to be installed. Buzzer ON/OFF button: Turns the buzzer sound ON or OFFPower Source: 6 standard 1.5 volt C size batteriesDevice Dimensions: 240 x 185 x 70 mm (9.5" x 7.3" x2.7")Weight: 870 g (not including battery)Multi-Function includes:1. Specially designed Acu-Point Electro-stim Therapy Pen, which can be used as direct stimulation right after the point detection.2. Acupuncture needles or conductive glue can be used for electrotherapy.3. There are 6 different waveforms, including HAN waveformAccessories Included:LOC/STIM Probe 1 pc. Connecting wire (assorted colors) 6 pcs. Connecting wire adapter 6 pcs. Battery 6 pcs. Instruction Manual 1 pcSuitable for use with:Pin Lead Wire for E600 (Round Type) STLE0017Pin Lead Wire for SDZ STLE0011E-STIM 3 Lead Wire red, Blue, Yellow, Brown Specifications Name Model E600 Stimulator