Stockton X Adam's Metal PolishStockton by Adam's Metal Polish is a blend of specialty abrasives. This formulation contains natural and synthetic sealers that will produce a lubricating effect and generate a highly durable finish that wont immediately re-oxidize. Our metal polish is suitable for a variety of surfaces including stainless, aluminum, chrome, brass, or even acts as an effective plastic polish. Features: Polish aluminum, chrome, stainless and uncoated metals Specialty abrasive for extremely fine finishes Natural and synthetic sealers Cleaning Instructions Step 1: Prepare surface to be polished by cleaning with any of our Supreme Foam Wash, All Purpose Cleaner, or even Waterless Wash. Step 2: Shake well and apply several pea size drops of Metal Polish to a microfiber applicator sponge. Step 3: Using light pressure (dont rub hard) apply in circular motions for 30 seconds to 1 minute and observe black oxidation generated. If no black oxidation is generated, then the surface is clear coated and discontinue use. Step 4: When cleaning up the residue from polishing, avoid using brighteners or ammonia-based products. We recommend our Waterless Wash or Deep Gloss Detailer along with a clean microfiber towel to remove residue and leave the best finish. Step 5: Fold towel into fourths and wipe down surface, flipping towel to a fresh surface with each subsequent pass. Step 6: Repeat steps as necessary until defects and oxidation are satisfactorily removed. Common Sense WarningFULLY ALLOW BIKE TO COOL BEFORE WASHING. If it's too hot to touch it's too hot to wash. Not only do you risk hurting yourself but you also risk ruining the finish of your bike/exhaust/engine if the bike is hot while washing.Metal Polish is not designed for, nor works well on, clear coated metal and great care should be taken when polishing precious metals such as gold or silver plating. Its recommended to always test in a non-conspicuous area first! Product separation is completely normal. Shake before use.