Stockton X Adam's Rinse And SealA versatile, concentrated solution to quickly and effectively seal and protect all exterior surfaces in a minimal amount of time. Rinse and Seal is the perfect touch-free option to seal your bike's paint without introducing the risk of scratches or swirls. Simply wash and rinse your bike, mist the diluted Rinse and Seal on, and immediately rinse off. Rinse and Seal can be used on a bike as stand-alone protection or over the top of your favorite sealant or coating to further replenish and enhance the finish. Features: Mist On / Rinse Off complete protectant Protects surfaces for 1-3 months depending on use Quickly and easily coat all exterior surfaces Amplifies slickness, gloss, color and hydrophobic behavior No dye added Watermelon sugar scented Concentrated solution: Dilute 1:9 with water before use Pro Tip: 1 cap full is 0.4oz(For a 16oz bottle, use 4 capfuls) Cleaning Instructions Step 1: Dilute the concentrate with fresh water at a 1:9 ratio (1 part concentrate with 9 parts water for a total of 10 parts). Step 2: Following washing the bike and while it is still wet, mist the diluted Rinse and Seal solution onto all exterior surfaces working one section at a time. Step 3: Immediately rinse off the excess solution thoroughly and note the instantaneous hydrophobic behavior on the surface. Step 4: Either towel dry by hand or use forced air to finish drying the bike completely. Common Sense WarningFULLY ALLOW BIKE TO COOL BEFORE WASHING. If it's too hot to touch it's too hot to wash. Not only do you risk hurting yourself but you also risk ruining the finish of your bike/exhaust/engine if the bike is hot while washing.Rinse and Seal is a concentrated solution and requires dilution prior to use.